Please contact your SDS Administrator immediately if there are any chemicals in your inventory that are not listed in this system.

EFFECTIVE DATE

2013-05-01

PICTOGRAMS

HMIS

HEALTH

FLAMMABILITY

PHYSICAL HAZARD

PERSONAL PROTECTION

· General protective and hygienic measures Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the skin. Avoid contact with the eyes and skin. · Breathing equipment: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air. · Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed goggles. · Body protection: Protective work clothing.

NFPA

2

3

2

Rochester Public Schools
Local data

SKU #

*This local data is shared by all revisions

Rawn Plas-T-Pair Liquid

2013-05-01

Hazard Statements

Precautionary Statements

Manufacturer information

Name

Cortec Corporation

Phone

(651) 429-1100

Address

4119 White Bear Parkway
St. Paul, MN 55110

PICTOGRAMS

HMIS

HEALTH

FLAMMABILITY

PHYSICAL HAZARD

PERSONAL PROTECTION

· General protective and hygienic measures Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the skin. Avoid contact with the eyes and skin. · Breathing equipment: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air. · Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed goggles. · Body protection: Protective work clothing.

NFPA

2

3

2

Rochester Public Schools
Local data

SKU #

*This local data is shared by all revisions